Call us on 01480 774411
Call us on 01480 774411
ENCLOSUREEMU BLACK bespoke enclosure is made from CNC machined aluminium. The enclosure design guarantee high immunity to mechanical damage, water ...
View full detailsRaychem 55 wiring, PRICE IS PER 10 METERS - please select x2, x3, for multiple purchases Various diameter's available from AWG24 to AWG14. AWG24 u...
View full detailsThe ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practi...
View full detailsThe ECUMASTER USB to CAN is a USB interface that allows the user to connect to the CANbus network. It supports CAN 2.0A and CAN 2.0B standards. It...
View full detailsAffordable pressure sensor suitable for fuel and oil pressure measurements.Power supply - 5vSignal 0-10 bar - 0.4-4.5vConnection - 1/8 NPTSupplied ...
View full detailsHeat-Shrinkable, Flexible, Chemical and Abrasion Resistant TubingApplications Specially formulated for optimum high-temperature fluid resistance, a...
View full detailsDeutsch DTM connector represent excellent value for money.Easy to work on and highly reliable construction makes them first choice in semi-pro mot...
View full detailsDigital ECU Tuner 3 is the most popular device as a "piggy back" unit on the market. Due to its many features and cost friendly price, this produc...
View full detailsRoundit® 2000 is a wrap-around sleeving manufactured from modified monofilament and textured polyester yarn, designed for mechanical protection and...
View full detailsECUMASTER EMU Classic is an advanced engine management system controlling operation of multi spark ignition engines. It controls all aspects of the...
View full detailsPush button switches for all your automotive needs, available in a wide range of colours and as either flush or raised from their housing. Momentar...
View full detailsState of the art product from ECUMASTER top of the modern power distribution technology.Intelligent power distribution simplify your wiring and pro...
View full details2.5 meters long set of wires with crimped terminals for use with EMU Black engine management system.Shielded Wire available here 2 Core 3 Core
This sensor is designed to measure the proportion of oxygen in exhaust gases of automotive engines (gasoline or Diesel). The wideband lambda sensor...
View full detailsThe ECUMaster GPS to CAN Module V2 provides high-accuracy position tracking with 25 Hz update rate. It is designed to work with four navigation sy...
View full detailsConnector used for LSU.4.9 oxygen sensorSupplied with seals and terminals
Genuine Bosch pressure and temperature sensor PST-F 1 Robust design and stainless steel diaphragm making it usable for fuel and oil. Link for Data...
View full detailsDEUTSCH DT Series of environmentally-sealed connectors are designed specifically for cable to cable applications on the engine or transmission, und...
View full detailsResintech RT125 is the definitive adhesive for robust cable harness assemblies, boasting superior flexibility and a remarkable capacity for chemi...
View full detailsConnector for the Bosch Motorsport range of electronic throttles. Supplied with terminals and seals
Thermocouple to CAN ModuleMeasuring exhaust gas temperature for each cylinder is a very cost effective way to monitor and check air distribution in...
View full details2.5 meters long set of wires with crimped terminals for use with EMU Classic engine management system.Shielded Wire available here 2 Core 3 Core
Connector kit used with the Ecumaster EMU Black.Supplied with a set of terminals.
THE DATALOGGER for EMU CLASSIC and EMU BLACK is capable of recording all log channels (the same as on PC) with 25Hz on SDHC card (4GB or bigger req...
View full detailsOur new product designed to provide a sealed solution for bulkhead wiring solutions.Requires a 60mm panel cut-out - large enough to feed complete e...
View full detailsOil/ coolant temperature sensor - low cost.1/8 thread and fly-leads with Superseal connector.Supplied with 330R pull-up resistor - internal pullups...
View full detailsATUM has an internal adhesive coating that, when heated, melts and flows to form a positive environmental barrier to prevent moisture penetration. ...
View full detailsA CAN switch board is a tiny device to allow easy transfer of up to 8 switch states and 8 analog signals over the CAN bus. In addition to thi...
View full detailsCan bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...
View full detailsApplicationsDesigned to encapsulate components, splices and terminations where moisture resistance and mechanical protection are required. Encapsul...
View full detailsThis sensor is designed to measure the proportion of oxygen in exhaust gases of automotive gasoline engines. The wideband lambda sensor LSU 4.2 is...
View full detailsCradles for both EMU Classic and Black as well as for PMUs. Supplied with AV mounts. Photo is of EMU Classic Mount
Ecumaster Bluetooth module designed for communication with Ecumaster EMU Black via Can Bus. Enabling data to be displayed on android devices ...
View full detailsPush button switches for all your automotive needs, available in a wide range of colours and as either flush or raised from their housing dependant...
View full detailsConnector kit used for LSU 4.2 lambda sensorSupplied with terminals and seals
Connector used on the PST-F 1 Bosch combined pressure and temperature sensor. Supplied with pins and terminals
One of the most common connectors used in older fuel injection systems as well as a number of Bosch sensorsSupplied with terminals and seals
This sensor is designed to measure air temperature e.g. in the air box or ambient temperature. The signal may be used as a control value for engine...
View full detailsProfessional EGT probe. This sensor is designed to measure exhaust gas temperatures up to 1,300°C. Thermocouples are temperature sensors, which gen...
View full detailsEcumaster Lambda to CAN controller is a compact device used to control a Bosch LSU 4.9 wideband oxygen sensor and transmit the lambda reading via ...
View full detailsThis is one of the finest boost control solenoids on the market, originally designed for industrial pneumatic machinery and just as sturdy.These va...
View full details3 Way Connector used on some Bosch MAP Sensors Supplied with terminals and seals
Suitable for Honda 3 pins active coils.Supplied with terminals and seals.
The very common connector in Honda's range of cars. Typical applications include; - Camshaft position - MAP sensor - TPS -Crankshaft position sens...
View full details2 Way Bosch Knock Sensor Connector Supplied with terminals and seals
Connector kit used with the Ecumaster EMU ClassicSupplied with a set of terminals.
Connector suitable for active VAG coils.Supplied with terminals and seals