Products

10 BAR GAUGE PRESSURE SENSORS are ideally suited for automotive applications such as oil and fuel pressure. Thread - 1/8NPT or AN3 Calibration 0.5...

Fully sealed potentiometer for use for example boost or traction control adjuster. Adjustable stops enabling to set any number positions from 2 up ...

  100 BAR GAUGE PRESSURE SENSORS are ideally suited for automotive applications such as fuel pressure on Di engines or brake pressure. Thread -  AN...

  100 BAR GAUGE PRESSURE SENSORS are ideally suited for automotive applications such as fuel pressure on Di engines or brake pressure. Thread -  AN...

Toyota 1JZ Throttle Position Sensor Connector 3 Way Supplied with seals and terminals 

Connector used for dashboard temperature sensor  Supplied with terminals and seals  

44 wire has a dual wall construction that combines the outstanding physical and electrical characteristics of radiation cross-linked polyalkene wit...

One of the most common connectors used in older fuel injection systems as well as a number of Bosch sensorsSupplied with terminals and seals 

Twisted wire 22 gauge pair cable This twisted pair is constructed with 2 X M22759/32 22 AWG conductors 1 twist per inch as per MIL standards Condu...

Some owners don't need a big catalyser, or another silencer (SDCP) - just the best power/torque AND best sound! This combination of stepped 4-1 man...

All Stainless 304/316 construction. 10mm thick Stainless head flange with laser-cut expansion slots and zero distortion after welding. Stepped prim...

Genuine NGK ignition coil used in the Lotus Exige and Evora 2GR V6

High-performance ARP bolts for use with OEM rods. Comes as a set of 8 with ARP Ultratorque lubricant. Please remember the stock bolts are torque-to...

  The 2ZR crankshaft main bearings are authentic Toyota products and come in a set. One set is required for each main bearing in the engine, so a t...

Made for us by renowned UK valve manufacturer. Sold as a set of 8.  They are made of high performance steel with Stellite seat. An additional plasm...

High performance intake valves made by reputable UK manufacturer: Supplied in a set of 8.  The valves are plasma nitrided and super polished for ma...

The recent design of many engines is focused on lower possible parasitic losses and efficiency, the design of the valve spring needs to match this ...

The 2ZR rod bearings are genuine Toyota products and come in a set. One set is required for each con rod in the engine, so a total of four sets wou...

New camshaft position sensor. Fits: 2005+ Lotus 1.8L (Toyota 2ZZ Powered) All2000-05 Celica GTS2003-07 Matrix/Corolla/Vibe 2ZZ (VVTLi) AllAll 2ZZ-G...

44 wire has a dual wall construction that combines the outstanding physical and electrical characteristics of radiation cross-linked polyalkene wit...

Used at LS engines for crank sensor and MAP sensor.Supplied with terminals and seals.

One of the most common connectors used in older fuel injection systems Supplied with terminals and seals 

This connector is used with many Toyota applications, like AC connector, or knock sensor connector on lotus V6 cars. Supplied with terminals and se...

One of the most common connectors used in older fuel injection systems.Supplied with terminals and seals 

4 Way Pull to Seat ConnectorSupplied with terminals and seals

55 pin Motronic connector. Used in Audi, VW, BMW and other

  This sensor is perfect for all low pressure applications, including but not limited to crank pressure, coolant system pressure, gearbox oil press...

This 7 way socket is used for coil sub-loom connection. Supplied with seals and terminals

8 way connector used with AC control module and multifunction relay on Lotus models. Very common source of problems with rad fans or multifunction ...

Typical older Motronic header . 88 Way used for making adaptor harness .

High quality fluid keeps supercharger bearings operating properly Unique product has excellent oxidation stability and low wear characteristics Sp...

A loom pre built for your ECUMaster ADU5 or ADU7, using the original AMPSEAL connector. Taking away the stress of wiring in your own dash.Fitted wi...

Made of durable and flexible ABS which is easy to cut to the required shape as your build may not always be the straight OEM binnacle shape. It can...

 Made of durable and flexible ABS which is easy to cut to the required shape as your build may not always be the straight OEM binnacle shape. It ca...

AiM MXG 1.2 Dash Logger. The MXG 1.2 Dash Logger has a 7" TFT display, and can acquire and display data coming from your ECU. AiM MXG 1.2 Dash Logg...

AiM MXS 1.2 TFT Digital Display & Dash Logger The MXS 1.2 TFT is a dash logger designed to acquire and display data coming from your ECU. AiM M...