2ZZ Lotus Parts

Our product is dedicated for all Lotus S2 enthusiasts, this system is a great upgrade for your car because it gives you full control over your...

Link loom for connecting a wideband oxygen sensor (LSU4.9) to the Ecumaster EMU Black PnP ECU for Lotus 2zz DBW cars.  One end plugging into existi...

 There is a lot of room for improvement on the Lotus shift cable. The ends of the cable fitted on the Exige and Elise are not sufficient enough to ...

As the stock Toyota nuts are very shallow and easily rust making them hard to remove and easily rounded, we suggest when changing the exhaust manif...

STRONGER 3RD AND 4TH GEAR SET WHICH IS A DIRECT REPLACEMENT FOR THE OEM GEARS AT THE SAME RATIOS. PROS: We have never broken a set and have run up...

Plug and play kit using the Ecumaster EMU Black  Thanks to the additional connector for intake air temperature (sensor available separately) it is ...

High quality fluid keeps supercharger bearings operating properly Unique product has excellent oxidation stability and low wear characteristics Sp...

These are 550cc direct replacement of the denso Toyota injectors. Use these injectors for highly modified engines. 550 cc/min custom manufactu...

Flywheel and flexplate bolts play an important role in the performance and safety of both street and race cars, which is why the fastener experts ...

Set of 4 stainless vented brake calliper pistons, designed to Brake Later Brake Harder Less Fade Mitigate Fluid Boil Less Heat Fits Elise, Most E...

Quaife ATB Helical LSD differential for the Lotus Elise SC and Cup using the Toyota EC60 Gearbox. A direct replacement for the standard open differ...

Our signature high torque units have been based on the Denso conventional offset gear reduction design, but units are now also being produced and s...

When considering lower-temperature thermostats, opinions may vary - some claim their effectiveness while others argue against their use. Our perspe...

Our kit will enable the easy installation of pressure sensors and connections to any stand-alone ECU or other data acquisition device. Please note ...

The Toyota flywheel gear ring (1345310010) has been expertly made by a specialized gear ring manufacturer in Europe, ensuring exceptional quality a...

3 way sealed convector used on Lotus Exige V6 Cup R for oil pressure sensor . Supplied with terminals

Complete connector for ECU for 2zz cable throttle engine. Supplied with terminals, seals, and cover.  Please note that the connector does not fit t...

A complete set of connectors you need to build your engine loom. All connectors are supplied with terminals and seals. If you want to build a loom ...

Complete set of connectors you need to build your engine loom. All connectors are supplied with terminals and seals. If you want to build a loom fo...

This connector will enable you to connect any aftermarket dash to OEM wiring loom. Used in the S2 and S3 platform. Supplied with a set of terminals.  

Complete set of (8) ARP rod bolts. Fits stock rods ONLY. The stock bolts are torque-to-yield and should NOT be reused. Add these bolts for increase...

2ZZ-Powertrain with C64-Gearbox In order to improve the originally fairly long ratio of the final drive of the Elise 111R/Exige MK 2 and therefore ...

Ventilated  one-piece discs. A perfect and cost-effective way to upgrade your brakes. Developed by PB racing and used in many race series across Eu...