ecumaster

Cradles for both EMU Classic and Black as well as for PMUs. Supplied with AV mounts. Photo is of EMU Classic Mount

This is our dual vanos module, this little box of tricks allows you to run the BMW dual vanos with your EMU Classic or any other ECU without the op...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

  This listing is for a plug and play adaptor only. The ECUMASTER Plug and Play adaptor for JZX100 VVTi 1JZ with Manual Transmission (4 rows of pin...

For years we've received requests for a VVTi 2JZ Plug and Play adaptor, and it's finally here. Non-VVTi motors are harder and harder to find, and t...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

  This cost-effective pressure sensor is ideal for measuring fuel and oil pressure. It operates on a 5v power supply and has a signal range of 0 ba...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

The 6 key inline setup offers a variety of installation possibilities in confined areas. This Canbus keypad can easily be integrated with our PMU-1...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

The ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practi...

Ecumaster ADU Connector including contacts.

A rubber version of the Ecumaster ADU for your keys!

Designed for use with Audi 2.2 engines ABY, 3B, AAN, the Ecumaster 2.2 Adaptor is a plug and play solution that eliminates the need for modifying t...

Plug & Play kit for connecting the 2.7 Audi RS4 / B5 engine harness with an Ecumaster EMU Black.

Treat your noggin to something stylish, high quality, and comfortable with this ECUMaster embroidered snapback. The ECUMaster logo is 3D embroidere...

The Ecumaster Battery Isolator is a motorsport master relay device designed for FIA compliant battery isolation and engine shutdown. The device is ...

The Ecumaster Battery Isolator is a motorsport master relay device designed for FIA compliant battery isolation and engine shutdown. The device is ...

The Ecumaster Battery Isolator is a motorsport master relay device designed for FIA compliant battery isolation and engine shutdown. The device is ...

The new Ecumaster Beanie Hat perfect for those early morning track days where your ears get a little chilly! Thinsulate™ lining. Double layer knit...

  Adaptor for BMW M50 engine to connect OEM Loom to the EMU Classic/Black. Please specify if you require VANOS or NON VANOS when purchasing. and wh...

Today, motorsport success relies largely on data analysis. Important factors include tyre and brake disc temperatures. We are proud to introduce ou...

Ecumaster Bluetooth module designed for communication with Ecumaster EMU Black via Can Bus. Enabling data to be displayed on android devices ...

  The EDL1 data logger can record all log channels at 25Hz on an SDHC card (4GB or larger required), the same as on a PC. Additionally, it is capab...

Connection cable for Ecumaster Data Logger -1 (EDL-1).Length: 1.5m (shielded)Set has EDL-1 plug

The DBW module is required to allow EMU to control the electronic throttle and it is connected to the an AUX or an INJ output.  up to 7A H-Bridge ...

Digital ECU Tuner 3 is the most popular device as a "piggy back" unit on the market. Due to its many features and cost friendly price, this produc...

Connector kit for the Ecumaster DET3 piggyback Supplied with: Connector, a full set of terminals, 1x diode, 2x 1k resistors and 2x 2k resistors

Pigtail wiring loom for the Ecumaster DET3

The digital gear indicator is designed to work with an aftermarket ECU using a CAN stream device to show the driver the current gear and (optional)...

  The device contains two independent H-Bridges, with over-current and short circuit protection, capable of 10A continuous current and 30A peak cur...

Professional EGT probe. This sensor is designed to measure exhaust gas temperatures up to 1,300°C. Thermocouples are temperature sensors, which gen...

Thermocouple to CAN ModuleMeasuring exhaust gas temperature for each cylinder is a very cost effective way to monitor and check air distribution in...

ENCLOSUREEMU BLACK bespoke enclosure is made from CNC machined aluminium. The enclosure design guarantee high immunity to mechanical damage, water ...

A rubber version of the ever popular Ecumaster EMU Black, Incredible detail down to connectors and heat soak fins. 

  Our product is dedicated for all Lotus S2 enthusiasts, this system is a great upgrade for your car because it gives you full control over yo...

2.5 meters long set of wires with crimped terminals for use with EMU Black engine management system.Shielded Wire available here 2 Core 3 Core 

    Ecumaster Plug In ECUs feature EMU Black technology in an OEM fitment enclosure for easy installation. Unlike Ecumaster Interconnectors, ...

The EMU Black is a class-leading, stand-alone engine management system, designed to operate the most advanced and complex engines available. It is ...

The EMU Black is a class-leading, stand-alone engine management system, designed to operate the most advanced and complex engines available. It is ...

The CANBUS module is an add on module enabling CAN communication of Ecumaster EMU Classic with external loggers or dashboards. Additional 4 analog...

Connector kit used with the Ecumaster EMU ClassicSupplied with a set of terminals.

ECUMASTER EMU Classic is an advanced engine management system controlling operation of multi spark ignition engines. It controls all aspects of the...

2.5 meters long set of wires with crimped terminals for use with EMU Classic engine management system.Shielded Wire available here 2 Core 3 Core

The EMU PRO is a stand-alone engine management system aimed directly at professional motorsport with a comprehensive feature set and vast tuning po...

The EMU PRO is a stand-alone engine management system aimed directly at professional motorsport with a comprehensive feature set and vast tuning p...

Adaptor for Fiat 500 Abarth.