Ecumaster

The ECUMaster GPS to CAN Module V2 provides high-accuracy position tracking with 25 Hz update rate. It is designed to work  with four navigation sy...

  The new Ecumaster GPS to CAN V2 Autosport Module is designed for more demanding customers who need Autosport connection. Featuring capability to ...

Ecumaster H-Bridge Connector, including terminals and seals.

Haldex Drag Racing Controller is an essential device for every competitor using car equipped with a Haldex 4Motion system in drag racing. All the ...

Ecumaster Lambda to CAN controller is a compact device used to control a Bosch LSU 4.9 wideband oxygen sensor and transmit the lambda reading via ...

ECUMASTER Plug and Play adaptor for the 1999-2000 Mazda MX5NB1 with manual transmission allows for plug and play installation of the EMU  Black st...

Adaptor used for connecting Ecumaster EMU either Classic or Black with the Mitsubish EVO 4-8 OEM wiring loom 4 connector version

  This compact device allows for the connection of up to 3 switches to a single analogue input on Ecumaster products. Utilizing highly precise resi...

  The Ecumaster Nissan RB20/25/26 and SR20/(76 pin) P&P Adaptor allows for complete control and utilization of an Ecumaster EMU Black or Classi...

  Designed for Nissan vehicles equipped with a 64-pin connector, specifically those with the SR Engine. Compatible with both EMU Classic and Black....

  This cost-effective pressure sensor is ideal for measuring fuel and oil pressure. It operates on a 5v power supply and has a signal range of 0-10...

Oil/ coolant temperature sensor - low cost.1/8 thread and fly-leads with Superseal connector.Supplied with 330R pull-up resistor - internal pullups...

PMU-24 DL is an new advanced Power Management Unit offering the advantages of PMU-16, plus additional high-side outputs and an integrated data logg...

State of the art product from ECUMASTER top of the modern power distribution technology.Intelligent power distribution simplify your wiring and pro...

The PMU16 Autosport Version is designed for demanding customersand installations where reliability and robustness is a priority.Autosport connector...

For use with both PMU16 and PMU16DL PMU Connector supplied with terminals.  Please note these terminals are the same as EMU Black but EMU terminals...

Revolutionize your power distribution with the high-tech ECUMASTER PMU16DL. This cutting-edge solution offers intelligent and simplified wiring, el...

Connector kit used with PRO-8   Connector numbers:34pos: 4-1437290-126pos: 1473416-134pos: 4-1437290-0Terminal:51 x 3-1447221-522 x 3-1447221-421 x...

Bluetooth module designed for enabling data to be displayed from the Ecumaster EMU Classic or original silver box EMU on any android device or appl...

A CAN switch board is a tiny device to allow easy transfer of up to 8 switch states and 8 analog signals over the CAN bus. In addition to thi...

Adaptor for Subaru MY96-MY98 Looms to connect to the ECUMaster EMU Black or Classic Please specify the ecu are you intending to  use it (classic or...

Toyota 2JZ-GTE Plug & Play adaptor The perfect solution for a plug and play installation on any 2JZ vehicle, if you have a mk4 supra or a car w...

This adaptor unit will enable you to use Ecumaster EMU Classic or Black with OEM engine looms of the following: Toyota MR2 and Celica ST 180 and S...

  This adaptor is compatible with both EMU Classic and Black ECUs for the Mk3 Supra 1JZ engine. Please specify which ECU you plan to use.  

The ECUMASTER USB to CAN is a USB interface that allows the user to connect to the CANbus network. It supports CAN 2.0A and CAN 2.0B standards. It...

Plug and Play adaptor for VW Golf R32 to connect to Ecumaster EMU Black. For VW Engine code BFH or BUB (with small modification)

Reading and processing wheel speed data is a common porblem in modern racing cars. Most modern ABS systems use active magnetoresistive sensors and ...

Connector kit used with the Ecumaster EMU Black.Supplied with a set of terminals.

  This communication cable is designed for connecting the Race Technology Dash to the Ecumaster EMU Classic using the EMU Classic extension p...

  The EMU Pro Pre-Terminated Wiring Loom contains colour-coded and labelled wires for convenient installation and easy identification. It includes ...

  Connector kit for use with Ecumaster Pro 16 Connector numbers:34pos: 4-1437290-126pos: 1473416-134pos: 4-1437290-026pos: 3-1437290-7Terminals:62 ...

  This 3-pin connector is designed for use with Flex Fuel Sensors. It comes with supplied terminals, seals, and locks. Please note that the colour ...

Intake air temperature sensor IAT, ideally suited for use with ECUMASTER EMU. The sensor has an M12x1.5 thread.In the configuration of ECUMASTER EM...

  Additional keypad inserts for 4/6/8/12/15 button keypads Ecumaster offer. Please use the link to look at the inserts we offer.  Price is per inse...

This is one of the finest boost control solenoids on the market, originally designed for industrial pneumatic machinery and just as sturdy.These va...