Road Race Rally Engineering (RRR Engineering)

Fully sealed potentiometer for use for example boost or traction control adjuster. Adjustable stops enabling to set any number positions from 2 up ...

This connector is used with many Toyota applications, like AC connector, or knock sensor connector on lotus V6 cars. Supplied with terminals and se...

Made of durable and flexible ABS which is easy to cut to the required shape as your build may not always be the straight OEM binnacle shape. It can...

ADU7 Autosport spare connector AS614-35SN Supplied with terminals and insert/removing tool.

 Made of durable and flexible ABS which is easy to cut to the required shape as your build may not always be the straight OEM binnacle shape. It ca...

Aluminum Coated Fiberglass Heat Reflective Sleeve is a tubular shaped product that combines the protection of bonded aluminum and fiberglass into a...

Spare battery isolator connector supplied with set of terminals and terminal inserting/removing tool.

Spare terminal set for Ecumaster battery isolator.

Plug and play kit for use with BMW M54 engines Please note this adaptor is suitable for DME43 ECU before 06/2003. The later version with DME45 will...

Plug and play kit for use with BMW M54 engines Please note this adaptor is suitable for DME45 ECU after 06/2003. The earlier  version with DME43 wi...

Different coding Kostal connectors used in BWM. This one with the white lock is used for ignition coils, black locking tab versions are used for th...

This sensor is specially designed to measure absolute pressure in gasoline direct injection applications. This sensor is also compatible with other...

Genuine Bosch 3 bar map sensor, ideal for NA, supercharged or turbo applications (below 2 bar of boost). 5 Volt power supply. Easy to install and a...

This TPMS system easily connects to your car's data system via CAN. It monitors both tyre pressure and temperature, allowing you to set alarms for...

Effortlessly connect this TPMS system to your vehicle's CAN-bus data system. It effectively monitors tyre pressure and temperature, offering aler...

Hi-speed USB cable used for connecting PC to USB to CAN.

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colors which are used as a b...

Can the bus keypad easily integrate with our PMU-16 and Ecumaster EMU Black? Very rugged and fully waterproof.8 available colors which are used as ...

The EMU Black is a class-leading, stand-alone engine management system, designed to operate the most advanced and complex engines available. It is ...

Now available separately an EGT Sensor Boss with olive and m10x1 thread, these are normally supplied with our EGT Sensor.

1m Comms cable for the EMU Black "old version"to connect via USB to a laptop

1m Comms cable for the EMU Classic to connect via USB to a laptop

Fire Sleeve is manufactured from glass fibre yarn knitted to form a sleeve and coated with high-grade silicone elastomer rubber. Fire Sleeve is a v...

Connector used with the new hella PULS oil level sensor. Supplied with terminals and seals.  

4-way circular alternator connector. Supplied as a kit with terminals. 

Honda 2 way connector, very common on B-series engines  Supplied with seals and terminals

Used on many applications mainly for sensors and solenoids. (Subaru, Honda) Also used for HV2 injectors Please note there are two other versions of...

Honda camshaft position sensor, reverse lock solenoid and many other. Supplied with terminals and seals

Connector used for manufacturing adaptors for FN2 Honda cars

This connector is used for Honda solenoids, K20 intake air temperature sensor, coolant temperature sensor, VVT, and many others Please pay attentio...

The very common connector in Honda's range of cars. Typical applications include; - Camshaft position - MAP sensor - TPS  -Crankshaft position sens...

Honda K20 knock sensor connector. Supplied with terminals and seal.

Honda K20 VTEC Connector Please note keyway Please note there are two other versions of this connector  Middle keyway available here  Top keyway av...

Connector 3 way with bottom keyway. Supplied with terminals and seals

  This connector is designed for use with the Honda pedal position sensor and comes with terminals and seals.  

Used for MAP and TPS sensor connectors on many Honda B series engines. Also, many other Honda applications. Supplied with seals and terminals

PWM controlled idle control valve. As used in the Lotus Exige S1, Lotus Esprit and more. Quality German aftermarket part. Mating connector availabl...

Lambda link loom is used with a wide range of our custom plug and play adaptors. Please select the lambda type you are intending to use.

Latching 30mm switch as used as a battery isolator switch on racing versions of Lotus models Rated IP67 at the FRONT, If the back of the switch is ...

Our kit will enable the easy installation of pressure sensors and connections to any stand-alone ECU or other data acquisition device. Please note ...

As the stock Toyota nuts are very shallow and easily rust making them hard to remove and easily rounded, we suggest when changing the exhaust manif...

We recommend to always install a new gasket when replacing the exhaust manifold to ensure a tight seal around the manifold.  Quality products by Reinz

NEW PRODUCT!!! We have noticed that valve springs are "just about" good enough for 7200rpm, so we have decided to lose some weight in the valvetrai...

Rectangular lambda 4.2 connector.  Supplied with terminals and seals

Most commonly used for Mitsubishi but also in some Toyotas. Supplied with terminals and seals.

The connector used with Mitsubishi for the knock sensor. Supplied with terminals and seals

Nissan 2 way idle control valve connector Blue keyway. Supplied with terminals and seals