ecumaster

official ecu master beanie hat 

ecu master key ring  made from a circuit board with the ecu master logo and emu figure.

The official ECU Master Notepad features lined pages and a durable hardback cover.

official ecu master thermal mug with screw on lid 

Cradles for both EMU Classic and Black as well as for PMUs. Supplied with AV mounts. Photo is of EMU Classic Mount

This is our dual vanos module, this little box of tricks allows you to run the BMW dual vanos with your EMU Classic or any other ECU without the op...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

  This listing is for a plug and play adaptor only. The ECUMASTER Plug and Play adaptor for JZX100 VVTi 1JZ with Manual Transmission (4 rows of pin...

For years we've received requests for a VVTi 2JZ Plug and Play adaptor, and it's finally here. Non-VVTi motors are harder and harder to find, and t...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

The 6 key inline setup offers a variety of installation possibilities in confined areas. This Canbus keypad can easily be integrated with our PMU-1...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

  This eight-position rotary switch delivers precise control for adjusting traction settings or boost levels in performance applications. Engineere...

The ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practi...

Ecumaster ADU Connector including contacts.

Designed for use with Audi 2.2 engines ABY, 3B, AAN, the Ecumaster 2.2 Adaptor is a plug and play solution that eliminates the need for modifying t...

Plug & Play kit for connecting the 2.7 Audi RS4 / B5 engine harness with an Ecumaster EMU Black.

The Ecumaster Battery Isolator is a motorsport master relay device designed for FIA compliant battery isolation and engine shutdown. The device is ...

The Ecumaster Battery Isolator is a motorsport master relay device designed for FIA compliant battery isolation and engine shutdown. The device is ...

The Ecumaster Battery Isolator is a motorsport master relay device designed for FIA compliant battery isolation and engine shutdown. The device is ...

  Adaptor for BMW M50 engine to connect OEM Loom to the EMU Classic/Black. Please specify if you require VANOS or NON VANOS when purchasing. and wh...

Today, motorsport success relies largely on data analysis. Important factors include tyre and brake disc temperatures. We are proud to introduce ou...

Ecumaster Bluetooth module designed for communication with Ecumaster EMU Black via Can Bus. Enabling data to be displayed on android devices ...

  The EDL1 data logger can record all log channels at 25Hz on an SDHC card (4GB or larger required), the same as on a PC. Additionally, it is capab...

Connection cable for Ecumaster Data Logger -1 (EDL-1).Length: 1.5m (shielded)Set has EDL-1 plug

The DBW module is required to allow EMU to control the electronic throttle and it is connected to the an AUX or an INJ output.  up to 7A H-Bridge ...

  Digital ECU Tuner 3 is the most popular device as a "piggy back" unit on the market. Due to its many features and cost friendly price, this produ...

Connector kit for the Ecumaster DET3 piggyback Supplied with: Connector, a full set of terminals, 1x diode, 2x 1k resistors and 2x 2k resistors

Pigtail wiring loom for the Ecumaster DET3

The digital gear indicator is designed to work with an aftermarket ECU using a CAN stream device to show the driver the current gear and (optional)...

  The device contains two independent H-Bridges, with over-current and short circuit protection, capable of 10A continuous current and 30A peak cur...

Professional EGT probe. This sensor is designed to measure exhaust gas temperatures up to 1,300°C. Thermocouples are temperature sensors, which gen...

Thermocouple to CAN ModuleMeasuring exhaust gas temperature for each cylinder is a very cost effective way to monitor and check air distribution in...

ENCLOSUREEMU BLACK bespoke enclosure is made from CNC machined aluminium. The enclosure design guarantee high immunity to mechanical damage, water ...

  Our product is dedicated for all Lotus S2 enthusiasts, this system is a great upgrade for your car because it gives you full control over yo...