Best Sellers

  Budged version of screened wire, particularly useful for wiring vr sensors. This foil shielded multi-pair cable contains 24 AWG stranded tinned c...

The 400kPa MAP (Manifold Absolute Pressure) sensor from Ecumaster is a cost-effective and accurate automotive-grade pressure unit. It translates ab...

Budget version of screened wire, particularly useful for wiring sensitive sensors. This foil shielded cable contains 24 AWG stranded tinned copper ...

Connector suitable for active VAG coils.Supplied with terminals and seals

Connector kit used with the Ecumaster EMU ClassicSupplied with a set of terminals.

Bluetooth module designed for enabling data to be displayed from the Ecumaster EMU Classic or original silver box EMU on any android device or appl...

Suitable for Honda 3 pins active coils.Supplied with terminals and seals.

  This connector is designed for use with the Honda pedal position sensor and comes with terminals and seals.  

A loom pre built for your ECUMaster ADU5 or ADU7, using the original AMPSEAL connector. Taking away the stress of wiring in your own dash.Fitted wi...

This sensor is designed to measure fluid temperatures e.g.oil, water or fuel. This signal may be used as a control value for engine control units o...

The very common connector in Honda's range of cars. Typical applications include; - Camshaft position - MAP sensor - TPS  -Crankshaft position sens...

For use with both PMU16, PMU16DL and PMU24DL PMU Connector supplied with terminals.  Please note these terminals are the same as EMU Black but EMU ...

DEUTSCH DTP Series of environmentally-sealed connectors are designed specifically for cable to cable applications on the engine or transmission, un...

PMU-24 DL is an new advanced Power Management Unit offering the advantages of PMU-16, plus additional high-side outputs and an integrated data logg...

44 wire has a dual wall construction that combines the outstanding physical and electrical characteristics of radiation cross-linked polyalkene wit...

A high quality 220mm by 40mm decal saying "Powered by Ecumaster"  Available in white, silver or black colours perfect for your cars sticker collec...

The Ecumaster Battery Isolator is a motorsport master relay device designed for FIA compliant battery isolation and engine shutdown. The device is ...

The connector is used with an EV6 or USCAR type of injector and supplied with seals and terminals.

This sensor is used for detecting structural  vibrations in spark ignition engines due to uncontrolled combustion. . The main benefits of this sen...

This adaptor enables compatibility between the Ecumaster EMU Black and Ford Focus ST/RS Mk2 models. It ensures that all dash features remain fully ...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

Genuine Bosch 3 bar map sensor, ideal for NA, supercharged or turbo applications (below 2 bar of boost). 5 Volt power supply. Easy to install and a...

Ecumaster ADU Connector including contacts.

The EMU PRO is a stand-alone engine management system aimed directly at professional motorsport with a comprehensive feature set and vast tuning p...

The new RRR Engineering Lotus Elise S3 2ZR Intake kit consists of a gold anodised intake pipe mated to a PRORAM cone air filter ensuring maximum fl...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

Toyota  ECU coolant temperature sensor connector, green plug version side keyways shifted.

This TPMS system easily connects to your car's data system via CAN. It monitors both tyre pressure and temperature, allowing you to set alarms for...

The connector used for variable camshaft solenoid on many Toyota engines. for example 2JZ, 2GR, 2ZZ Supplied with terminals and seals.

Flex Fuel Sensor Kits are designed for use with aftermarket ECUs capable of reading an ethanol content sensor. The use of a Flex Fuel Sensor with t...

The connector used with Denso starter motors 1JZ, 2JZ, 2ZZ Supplied with terminal and seal.  

Twisted wire 22 gauge pair cable This twisted pair is constructed with 2 X M22759/32 22 AWG conductors 1 twist per inch as per MIL standards Condu...

Fully sealed potentiometer for use for example boost or traction control adjuster. Adjustable stops enabling to set any number positions from 2 up ...

Smaller pulley options for your Lotus Elise S3 2ZR engined car. As part of our 2ZR upgrade kits for 220-300hp, they raise the boost produced from ...

  The device contains two independent H-Bridges, with over-current and short circuit protection, capable of 10A continuous current and 30A peak cur...

  This 3-pin connector is designed for use with Flex Fuel Sensors. It comes with supplied terminals, seals, and locks. Please note that the colour ...

When considering changing from a Cable throttle for DBW, we strongly recommended using this sensor. Quick and cost-effective. Simply attach your ca...

Toyota camshaft position sensorToyota 1JZ-GTE Crankshaft Sensor ConnectorToyota 1JZ-GTE Camshaft Sensor ConnectorToyota 2JZ-GTE Crankshaft Sensor C...

Connector kit for the Ecumaster DET3 piggyback Supplied with: Connector, a full set of terminals, 1x diode, 2x 1k resistors and 2x 2k resistors

  Our product is dedicated for all Lotus S2 enthusiasts, this system is a great upgrade for your car because it gives you full control over yo...

Kit containing EMU Black ECU and adaptor for Toyota Celica/MR2/ 2ZZ engines. A new, improved design solved an issue with Celica fitment: there was ...

BMW camshaft position sensor connector Supplied with terminals and seals

Honda K20 VTEC Connector Please note keyway Please note there are two other versions of this connector  Middle keyway available here  Top keyway av...

This connector is used for Honda solenoids, K20 intake air temperature sensor, coolant temperature sensor, VVT, and many others Please pay attentio...

Used for MAP and TPS sensor connectors on many Honda B series engines. Also, many other Honda applications. Supplied with seals and terminals

Packard/Delphi/Delco 3-pin Pressure Sensor Connector as used on many of the oil/ fuel/fluid pressure sensors. This connector can be used with...

 Made of durable and flexible ABS which is easy to cut to the required shape as your build may not always be the straight OEM binnacle shape. It ca...

Reading and processing wheel speed data is a common porblem in modern racing cars. Most modern ABS systems use active magnetoresistive sensors and ...