Best Sellers

Compatible with the majority of 50ml adhesive cartridges. The Cartridge Gun For Dual Syringe Adhesive is ideal for RT125 adhesive application...

The connector used for Mazda RX7 and some Fords. Supplied with terminals and seals.  

Suits the AAC (main idle speed control solenoid) on R33 RB25DET engines.  Also suits S14 and S15 SR20DET’s.Supplied with terminals and seals

2 way connector for Denso pencil coils also used for Ford Coyote.

Connector used for dashboard temperature sensor  Supplied with terminals and seals  

The EMU Black is a class-leading, stand-alone engine management system, designed to operate the most advanced and complex engines available. It is ...

6 Pin Pedal Position Sensor Connector for many models of Mazda, Subaru, Daihatsu, Lexus and Toyota Supplied with terminals and seals

  Simplify installation with pre-terminated 2m wiring designed for the 4 bar Ecumaster map sensor. The small terminals of this sensor can be diffic...

The Ecumaster RF Steering Wheel Panel offers a professionally designed control interface that allows for customizable controls based on individual ...

Now available separately an EGT Sensor Boss with olive and m10x1 thread, these are normally supplied with our EGT Sensor.

This connector suits: Nissan SR20DE T Throttle Position Sensor (TPS) Nissan VQ30DETT ignition coils Nissan Oxygen Sensors - Loom Side Nissan KA24DE...

6 way throttle pedal connectorSupplied with terminals and seals.

  Introducing a new addition from MME - an affordable gear shift knob with a load cell. This knob features an integrated load cell (2 directional) ...

The Rotary Potentiometer Resistor Board is designed for Grayhill 56 series ten position rotary switches. It's a reliable, efficient and incredibly ...

Aluminum Coated Fiberglass Heat Reflective Sleeve is a tubular shaped product that combines the protection of bonded aluminum and fiberglass into a...

Denso Bottom Slot Connector for fuel injectors Supplied with terminals and seals 

  This Syltech Intake Air Temperature sensor features an optioned Deutsch DTM connector (DTM06-2S / DTM06-2S-E007) and an open caged stainless stee...

Genuine Bosch 453cc injector (commonly called green giant) Injector Body Design: Stainless steel and composite plastic Flow rate: 42lbs/hr @ 43.5 p...

This new version of our CAN Bridge module extends the number of available CAN bus bitrates.An even more compact 60x20mm circuit than previous V1 de...

Rectangular lambda 4.2 connector.  Supplied with terminals and seals

Quaife ATB Helical LSD differential for the Lotus Elise SC and Cup using the Toyota EC60 Gearbox. A direct replacement for the standard open differ...

ECU Header for the Honda K20 Engine fully populated Ecu header.

Alternator connector 4 way used with 2GR engine.Supplied with terminals and seals.

Used at LS engines for crank sensor and MAP sensor.Supplied with terminals and seals.

Cost effective inducting sensor (VR) for speed detection of ferrous toothed wheels.Very reliable easy to install suitable for variety "standalone" ...

Hi-speed USB cable used for connecting PC to USB to CAN.

The EMU Black is a class-leading, stand-alone engine management system, designed to operate the most advanced and complex engines available. It is ...

Latching 30mm switch as used as a battery isolator switch on racing versions of Lotus models Rated IP67 at the FRONT, If the back of the switch is ...

The NTK LZA-09E1 (previously known as the “L2H2″) is the current wideband sensor of choice for various ECUs. The sensor is available with a 30cm lo...

The most precise and easy way to get lap times. AiM Solo 2 is the most precise GPS lap timer there is with the ability to show you your lap delta l...

3 Way Toyota Idle Connector used on 1ZZ/2ZZ, Toyota 20V 4AGE, Toyota 3SGE, Toyota 3SGTE Connector is supplied with terminals and seals.

The connector used on Toyota throttle position sensor.Supplied with terminals and seals.  

High Current 2 Way conector Supplied with terminals

The Ecumaster Classic serial connector is used for enabling communication through the EMU classic serial port.  

The RF Steering Wheel Kit offers a convenient and versatile control interface for your vehicle. Equipped with eight inputs for push buttons and fou...

Nissan 2 way idle control valve connector Blue keyway. Supplied with terminals and seals  

SACHS Performance clutches are the first choice for demanding car drivers. Their extraordinary resilience guarantees an unforgettable driving expe...

Flywheel and flexplate bolts play an important role in the performance and safety of both street and race cars, which is why the fastener experts ...

2 pin CA18 Coolant temperature connector

Connector for Toyota MAP Sensors used on 1/2JZ EnginesSupplied with terminals and seals

This is our dual vanos module, this little box of tricks allows you to run the BMW dual vanos with your EMU Classic or any other ECU without the op...

  The Syltech Glass Fast Response M12 IAT features a DTM connector  with an open, exposed design housed in a long, hard-anodised alloy shell with a...

Genuine Bosch fuel injector  Description - 731cc/min = 500g/min = 66lb/hr @ 3bar- Single cone spray- Standard body length- Regular tip nozzle- 12 o...

Genuine Toyota exhaust manifold stud. Used on 2ZR and 2GR V6 engines.