Ecumaster

ENCLOSUREEMU BLACK bespoke enclosure is made from CNC machined aluminium. The enclosure design guarantee high immunity to mechanical damage, water ...

The ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practi...

The ECUMASTER USB to CAN is a USB interface that allows the user to connect to the CANbus network. It supports CAN 2.0A and CAN 2.0B standards. It...

  This cost-effective pressure sensor is ideal for measuring fuel and oil pressure. It operates on a 5v power supply and has a signal range of 0-10...

  Digital ECU Tuner 3 is the most popular device as a "piggy back" unit on the market. Due to its many features and cost friendly price, this produ...

ECUMASTER EMU Classic is an advanced engine management system controlling operation of multi spark ignition engines. It controls all aspects of the...

2.5 meters long set of wires with crimped terminals for use with EMU Black engine management system.Shielded Wire available here 2 Core 3 Core 

State of the art product from ECUMASTER top of the modern power distribution technology.Intelligent power distribution simplify your wiring and pro...

The ECUMaster GPS to CAN Module V2 provides high-accuracy position tracking with 25 Hz update rate. It is designed to work  with four navigation sy...

  The EDL1 data logger can record all log channels at 25Hz on an SDHC card (4GB or larger required), the same as on a PC. Additionally, it is capab...

2.5 meters long set of wires with crimped terminals for use with EMU Classic engine management system.Shielded Wire available here 2 Core 3 Core

Oil/ coolant temperature sensor - low cost.1/8 thread and fly-leads with Superseal connector.Supplied with 330R pull-up resistor - internal pullups...

Thermocouple to CAN ModuleMeasuring exhaust gas temperature for each cylinder is a very cost effective way to monitor and check air distribution in...

Pigtail wiring loom for the Ecumaster DET3

Cradles for both EMU Classic and Black as well as for PMUs. Supplied with AV mounts. Photo is of EMU Classic Mount

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

A CAN switch board is a tiny device to allow easy transfer of up to 8 switch states and 8 analog signals over the CAN bus. In addition to thi...

Ecumaster Bluetooth module designed for communication with Ecumaster EMU Black via Can Bus. Enabling data to be displayed on android devices ...

  Additional keypad inserts for 4/6/8/12/15 button keypads Ecumaster offer. Please use the link to look at the inserts we offer.  Price is per inse...

Ecumaster Lambda to CAN controller is a compact device used to control a Bosch LSU 4.9 wideband oxygen sensor and transmit the lambda reading via ...

The 400kPa MAP (Manifold Absolute Pressure) sensor from Ecumaster is a cost-effective and accurate automotive-grade pressure unit. It translates ab...

Bluetooth module designed for enabling data to be displayed from the Ecumaster EMU Classic or original silver box EMU on any android device or appl...

A loom pre built for your ECUMaster ADU5 or ADU7, using the original AMPSEAL connector. Taking away the stress of wiring in your own dash.Fitted wi...

PMU-24 DL is an new advanced Power Management Unit offering the advantages of PMU-16, plus additional high-side outputs and an integrated data logg...

The Ecumaster Battery Isolator is a motorsport master relay device designed for FIA compliant battery isolation and engine shutdown. The device is ...

This adaptor enables compatibility between the Ecumaster EMU Black and Ford Focus ST/RS Mk2 models. It ensures that all dash features remain fully ...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

The EMU PRO is a stand-alone engine management system aimed directly at professional motorsport with a comprehensive feature set and vast tuning p...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

  The device contains two independent H-Bridges, with over-current and short circuit protection, capable of 10A continuous current and 30A peak cur...

  Our product is dedicated for all Lotus S2 enthusiasts, this system is a great upgrade for your car because it gives you full control over yo...

Kit containing EMU Black ECU and adaptor for Toyota Celica/MR2/ 2ZZ engines. A new, improved design solved an issue with Celica fitment: there was ...

Reading and processing wheel speed data is a common porblem in modern racing cars. Most modern ABS systems use active magnetoresistive sensors and ...

The DBW module is required to allow EMU to control the electronic throttle and it is connected to the an AUX or an INJ output.  up to 7A H-Bridge ...

The CANBUS module is an add on module enabling CAN communication of Ecumaster EMU Classic with external loggers or dashboards. Additional 4 analog...

Revolutionize your power distribution with the high-tech ECUMASTER PMU16DL. This cutting-edge solution offers intelligent and simplified wiring, el...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

  The Ecumaster Nissan RB20/25/26 and SR20/(76 pin) P&P Adaptor allows for complete control and utilization of an Ecumaster EMU Black or Classi...

 Extremely popular Ford Fiesta ST150 package. Ideal for any modified fiestas. Updated and improved design now allows for direct installation and in...

    Ecumaster Plug In ECUs feature EMU Black technology in an OEM fitment enclosure for easy installation. Unlike Ecumaster Interconnectors, ...

  This compact device allows for the connection of up to 3 switches to a single analogue input on Ecumaster products. Utilizing highly precise resi...

Connection cable for Ecumaster Data Logger -1 (EDL-1).Length: 1.5m (shielded)Set has EDL-1 plug

The Ecumaster MFD15 52mm Can-Bus multi display is a powerful device for monitoring and displaying your vehicle's performance. Get superior performa...

1m Comms cable for the EMU Black "old version"to connect via USB to a laptop

Plug and Play adaptor for VW Golf R32 to connect to Ecumaster EMU Black. For VW Engine code BFH or BUB (with small modification)

  Adaptor for BMW M50 engine to connect OEM Loom to the EMU Classic/Black. Please specify if you require VANOS or NON VANOS when purchasing. and wh...

The digital gear indicator is designed to work with an aftermarket ECU using a CAN stream device to show the driver the current gear and (optional)...

The Ecumaster Battery Isolator is a motorsport master relay device designed for FIA compliant battery isolation and engine shutdown. The device is ...