Electrical

Thanks to solid-state technology - provide ultra-reliable switching critical components. Often used as upgrade supplied by us wiring looms where t...

Application;Toyota 2GR/2ZR camshaft position Supplied with terminals and seals

Toyota Oil Pressure Sensor Unit Connector.APPLICATIONS:Toyota 1JZToyota 2JZToyota 1UZToyota 3SGEToyota 4AGEAnd others.Supplied with terminals and s...

Alternative budget gear level load cell. Equipped with 2 switches which should be connected as a voltage divider, to enable throttle blip or cut on...

This connector is used on the Subaru WRX STI USDM 04-06, And all 06 and newer Subarus. This connector is also found on some Toyotas like the Scion ...

ECU header used with Toyota Starlet, Glanza 1.3 turbo

Connector used with M50 engine style ignition coils. Supplied with set of terminals.

Compatible with the majority of 50ml adhesive cartridges. The Cartridge Gun For Dual Syringe Adhesive is ideal for RT125 adhesive application...

Suits the AAC (main idle speed control solenoid) on R33 RB25DET engines.  Also suits S14 and S15 SR20DET’s.Supplied with terminals and seals

2 way connector for Denso pencil coils also used for Ford Coyote.

6 Pin Pedal Position Sensor Connector for many models of Mazda, Subaru, Daihatsu, Lexus and Toyota Supplied with terminals and seals

The connector used for Mazda RX7 and some Fords. Supplied with terminals and seals.  

Connector used for dashboard temperature sensor  Supplied with terminals and seals  

This connector suits: Nissan SR20DE T Throttle Position Sensor (TPS) Nissan VQ30DETT ignition coils Nissan Oxygen Sensors - Loom Side Nissan KA24DE...

6 way throttle pedal connectorSupplied with terminals and seals.

Denso Bottom Slot Connector for fuel injectors Supplied with terminals and seals 

Used at LS engines for crank sensor and MAP sensor.Supplied with terminals and seals.

Cost effective inducting sensor (VR) for speed detection of ferrous toothed wheels.Very reliable easy to install suitable for variety "standalone" ...

ECU Header for the Honda K20 Engine fully populated Ecu header.

Alternator connector 4 way used with 2GR engine.Supplied with terminals and seals.

The most precise and easy way to get lap times. AiM Solo 2 is the most precise GPS lap timer there is with the ability to show you your lap delta l...

3 Way Toyota Idle Connector used on 1ZZ/2ZZ, Toyota 20V 4AGE, Toyota 3SGE, Toyota 3SGTE Connector is supplied with terminals and seals.

The connector used on Toyota throttle position sensor.Supplied with terminals and seals.  

High Current 2 Way conector Supplied with terminals

2 pin CA18 Coolant temperature connector

Connector for Toyota MAP Sensors used on 1/2JZ EnginesSupplied with terminals and seals

Toyota  2GR crank position sensor connector.   Supplied with seals and terminals

4 Way Ignition Coil Connector used on LS engines

Sometimes there is limited space making it impossible to use a standard air intake temperature sensors in this case the M6 high performance sensor...

Alfa Romeo Coolant Temp Sensor Connector Supplied with terminals and seals

Toyota 2 Pin Vacuum Switching Valve (VSV) Connector Plug for 1JZ 2JZ 1UZ Engines

Protect your expensive electronics Fitted to all chassis looms we produce, the high voltage spike suppressor is now available as a stand-alone par...

Connector for Lotus MAF Sensor 5 WaySupplied with terminals and seals