Electrical

6 way throttle pedal connectorSupplied with terminals and seals.

Alternator connector 4 way used with 2GR engine.Supplied with terminals and seals.

Connector for Toyota MAP Sensors used on 1/2JZ EnginesSupplied with terminals and seals

Denso Bottom Slot Connector for fuel injectors Supplied with terminals and seals 

A solid-state fuel level sensor provides a continuous output of tank contents in 0v-5VDC voltage format. The sensor can be re-calibrated each time ...

2 pin CA18 Coolant temperature connector

Toyota distributor connector also used for throttle pedal and TPS.Supplied with terminals and seals.

Toyota  2GR crank position sensor connector.   Supplied with seals and terminals

4 Way Ignition Coil Connector used on LS engines

This ECU header is used by Subaru, Toyota, Mitsubishi and Mazda. Very common across range. Extremely useful if you do not want to made any changes ...

Toyota 2 Pin Vacuum Switching Valve (VSV) Connector Plug for 1JZ 2JZ 1UZ Engines

ECU Header for the VAG AGU engine. A 1.8T I4 20v engine found in the VW MK4 Polo, MK4 Golf, Bora/Jetta, Passat B5, Beetle, Seat Ibiza, Cordoba, Leo...

  100 BAR GAUGE PRESSURE SENSORS are ideally suited for automotive applications such as fuel pressure on Di engines or brake pressure. Thread -  AN...

Protect your expensive electronics Fitted to all chassis looms we produce, the high voltage spike suppressor is now available as a stand-alone par...

This dual spark ignition coil is designed for low-cost applications in 4-cylinder engines.(or 8-cylinders if two used)The Double Fire Coil 2x2 has ...

Denso Injector Connector Supplied with terminals and seals 

Connector for Lotus MAF Sensor 5 WaySupplied with terminals and seals

Connector suitable for early 1JZ engines and 1UZ engines 

10 BAR GAUGE PRESSURE SENSORS are ideally suited for automotive applications such as oil and fuel pressure. Thread - 1/8NPT or AN3 Calibration 0.5...

  The Series of Non-Contact Rotary Position Sensors are designed to withstand the harsh environments of motorsport and automotive testing applicati...

GPS Lap Timer & Data Logger  AiM Solo 2 DL is the most precise and simple way to get lap times, with ECU data and overlay it all with your Sma...

 Toyota MAF Connector for 1JZ/2JZ/2ZZ amongst many other cars. Supplied with terminals and seals.

Engine Coolant Temperature Connector for Lotus Evora/Exige 2GRConnector supplied with terminals and seals

  The Honda B Series Distributor Connector's chassis side includes supplied terminals and seals.  

Honda B series distributor connector.Male terminals - distributor side .Supplied with terminals and seals.

Injector and coils connector for Toyota/MazdaSupplied with terminals and seals

Connector used for throttle bodies on LS3 and LS7 engines

3 way connector suitable for the Bosch P65 COPSecondary lock for great reliability. Internally sealed.Supplied with terminals

Ecumaster H-Bridge Connector, including terminals and seals.

A fully populated adaptor and EMU Black for your E46 M3 project.Fully populated with working CANBUS and branches for analogue signals and switches. 

4 Way Nissan CA18 Ignition Chip Connector

3 Way Bosch Connector for Coils Supplied with terminals and seals  Used with Alfa Romeo V6 engine where is not enough space for modern 3way JT

VW Audi Coil Connector Fits :Beetle 98-05, Golf & GTI 99, 8th digit VIN J Golf & GTI 00-04 Golf & GTI 05, 8th digit VIN J Jetta 99, 8th...

ECU Header for Subaru WRX model years 98-99

BMW, Porsche DME ECU Header

ECU used at various Nissan vehicles including Skyline RB25 and RB26

  This cost-effective pressure sensor is ideal for measuring fuel and oil pressure. It operates on a 5v power supply and has a signal range of 0 ba...

Sometimes there is limited space making it impossible to use a standard air intake temperature sensors in this case the M6 high performance sensor ...

Ballast resistor - required if you need to control low impedance injectors You will need one resistor per injector.

Used at GM V8 engines for coolant temperature sensor

This 7 way socket is used for coil sub-loom connection. Supplied with seals and terminals

Lotus 2ZZ DBW Header used for making adaptor looms for standalone ECUs

ECU header used in Toyota and Mazda.

Toyota Lexus ECU Header.Used in 2JZ VVT engines

Delphi 2 Way Connector  Supplied with terminals and seals

Toyota 1JZ Throttle Position Sensor Connector 3 Way Supplied with seals and terminals 

Lotus Lambda Sensor Connector for Elise and Exige modelsSupplied with terminals and seals