New in

Connector for Vanos unit on S54 engine. Supplied with terminals and seals

Connector for Bosch VW/Audi BMW throttle.Supplied with terminals and seals

Connector for the Bosch Motorsport range of electronic throttles. Supplied with terminals and seals

BMW camshaft position sensor connector Supplied with terminals and seals

Connector used with S54 (Mini Cooper) ignition coil. Supplied with terminals and seals

Connector used with M50 engine style ignition coils. Supplied with terminals and seals

6 way connector used for idle speed control stepper motor 1JZ and 2JZConnector is supplied with terminals and seals.

Plug and play kit using the Ecumaster EMU Black  Thanks to the additional connector for intake air temperature (sensor available separately) it is ...

Connector used for LSU.4.9 oxygen sensorSupplied with seals and terminals

Connector kit used for LSU 4.2 lambda sensorSupplied with terminals and seals

  Designed for Nissan vehicles equipped with a 64-pin connector, specifically those with the SR Engine. Compatible with both EMU Classic and Black....

  This adaptor is compatible with both EMU Classic and Black ECUs for the Mk3 Supra 1JZ engine. Please specify which ECU you plan to use.  

Connector used for camshaft position sensor on the Evo, Eclipse amongst others. Supplied with terminals and seals

Connector used for dashboard temperature sensor  Supplied with terminals and seals  

Toyota  ECU coolant temperature sensor connector, green plug version side keyways shifted.

Injector and coils connector for Toyota/MazdaSupplied with terminals and seals

Toyota camshaft position sensorToyota 1JZ-GTE Crankshaft Sensor ConnectorToyota 1JZ-GTE Camshaft Sensor ConnectorToyota 2JZ-GTE Crankshaft Sensor C...

Connector used for 3 pin Toyota alternator.

Used forToyota 1UZ-FE Throttle Position Sensor Connector.Toyota 1JZGTE Throttle Position Sensor Connector.Toyota 2JZGTE Throttle Position Sensor Co...

Fuel injector connector supplied with terminals and seals.

Connector used for throttle bodies on LS3 and LS7 engines

Toyota  2GR crank position sensor connector.   Supplied with seals and terminals

Header used for connection stand alone engine management and OEM engine wiring loom Lotus S1

ECU header used for connection stand alone ECU and 2ZZ cable throttle Lotus OEM engine loom.Please note this item is not suitable for VAG 1.8T 

A CAN switch board is a tiny device to allow easy transfer of up to 8 switch states and 8 analog signals over the CAN bus. In addition to thi...

Connector suitable for active VAG coils.Supplied with terminals and seals

Suitable for Honda 3 pins active coils.Supplied with terminals and seals.

4 way Toyota pencil coil connector. These coils are comonly used in Lotus/Toyota engines and also they are very popular in coil on plug conversions.

Ecumaster Bluetooth module designed for communication with Ecumaster EMU Black via Can Bus. Enabling data to be displayed on android devices ...

This sensor is designed to measure the proportion of oxygen in exhaust gases of automotive engines (gasoline or Diesel). The wideband lambda sensor...

  The EDL1 data logger can record all log channels at 25Hz on an SDHC card (4GB or larger required), the same as on a PC. Additionally, it is capab...

ENCLOSUREEMU BLACK bespoke enclosure is made from CNC machined aluminium. The enclosure design guarantee high immunity to mechanical damage, water ...

  The Ecumaster Nissan RB20/25/26 and SR20/(76 pin) P&P Adaptor allows for complete control and utilization of an Ecumaster EMU Black or Classi...

This is one of the finest boost control solenoids on the market, originally designed for industrial pneumatic machinery and just as sturdy.These va...

This is our dual vanos module, this little box of tricks allows you to run the BMW dual vanos with your EMU Classic or any other ECU without the op...

Connector kit for the Ecumaster DET3 piggyback Supplied with: Connector, a full set of terminals, 1x diode, 2x 1k resistors and 2x 2k resistors

Toyota 2JZ-GTE Plug & Play adaptor The perfect solution for a plug and play installation on any 2JZ vehicle, if you have a mk4 supra or a car w...

Designed for use with Audi 2.2 engines ABY, 3B, AAN, the Ecumaster 2.2 Adaptor is a plug and play solution that eliminates the need for modifying t...

Adaptor used for connecting Ecumaster EMU either Classic or Black with the Mitsubish EVO 4-8 OEM wiring loom 4 connector version

Connector kit used with the Ecumaster EMU ClassicSupplied with a set of terminals.

Connector used with EV6 or uscar type of injector. supplied with seals and terminals.

4 Way Ignition Coil Connector used on LS engines

  This sensor is perfect for all low pressure applications, including but not limited to crank pressure, coolant system pressure, gearbox oil press...

The CANBUS module is an add on module enabling CAN communication of Ecumaster EMU Classic with external loggers or dashboards. Additional 4 analog...

This adaptor unit will enable you to use Ecumaster EMU Classic or Black with OEM engine looms of the following: Toyota MR2 and Celica ST 180 and S...

High Current 2 Way conector Supplied with terminals

One of the most common connectors used in older fuel injection systems.Supplied with terminals and seals