New in

A fully functioning ECU for the Lotus 2ZR/1ZR engine, variations depending on car, 220, 250, 260 Cup. The Valvematic delete kit, which can be found...

Reading and processing wheel speed data is a common porblem in modern racing cars. Most modern ABS systems use active magnetoresistive sensors and ...

Push button switches for all your automotive needs are available in a wide range of colours and can be flush or raised from their housing. Momentar...

Today, motorsport success relies largely on data analysis. Important factors include tyre and brake disc temperatures. We are proud to introduce ou...

The digital gear indicator is designed to work with an aftermarket ECU using a CAN stream device to show the driver the current gear and (optional)...

Kit containing EMU Black ECU and adaptor for Toyota Celica/MR2/ 2ZZ engines. A new, improved design solved an issue with Celica fitment: there was ...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

A fully populated adaptor and EMU Black for your E46 M3 project.Fully populated with working CANBUS and branches for analog signals and switches. 

A loom pre built for your ECUMaster ADU5 or ADU7, using the original AMPSEAL connector. Taking away the stress of wiring in your own dash.Fitted wi...

  The device contains two independent H-Bridges, with over-current and short circuit protection, capable of 10A continuous current and 30A peak cur...

Alternative budget gear level load cell. Equipped with 2 switches which should be connected as a voltage divider, to enable throttle blip or cut on...

Plug and Play adaptor for VW Golf R32 to connect to Ecumaster EMU Black. For VW Engine code BFH or BUB (with small modification)

6 Pin Pedal Position Sensor Connector for many models of Mazda, Subaru, Daihatsu, Lexus and Toyota Supplied with terminals and seals

Packard/Delphi/Delco 3-pin Pressure Sensor Connector as used on many of the oil/ fuel/fluid pressure sensors. This connector can be used with...

4 Way Pull to Seat ConnectorSupplied with terminals and seals

Delphi 2 Way Connector  Supplied with terminals and seals

3 Pin connector for Flex Fuel Sensors.Supplied with terminals and seals 

Cradles for both EMU Classic and Black as well as for PMUs. Supplied with AV mounts. Photo is of EMU Classic Mount

This connector suits: Nissan SR20DE T Throttle Position Sensor (TPS) Nissan VQ30DETT ignition coils Nissan Oxygen Sensors - Loom Side Nissan KA24DE...

Connector for Toyota Ignition Noise Suppressors Supplied with terminals and seals 

2 Way Bosch Knock Sensor Connector Supplied with terminals and seals 

3 Way Bosch Connector for Coils Supplied with terminals and seals  Used with Alfa Romeo V6 engine where is not enough space for modern 3way JT

4 Way Bosch Connector for MAP Sensors Supplied with terminals and rubber seals 

 3 Way Connector used on some Bosch MAP Sensors Supplied with terminals and seals

Connector for Toyota MAP Sensors used on 1/2JZ EnginesSupplied with terminals and seals

Denso Bottom Slot Connector for fuel injectors Supplied with terminals and seals 

Alfa Romeo Coolant Temp Sensor Connector Supplied with terminals and seals

Denso Injector Connector Supplied with terminals and seals 

Toyota 1JZ Throttle Position Sensor Connector 3 Way Supplied with seals and terminals 

The connector used for Mazda RX7 and some Fords. Supplied with terminals and seals.  

VW Audi Coil Connector Fits :Beetle 98-05, Golf & GTI 99, 8th digit VIN J Golf & GTI 00-04 Golf & GTI 05, 8th digit VIN J Jetta 99, 8th...

Connector for Lotus MAF Sensor 5 WaySupplied with terminals and seals

 Toyota MAF Connector for 1JZ/2JZ/2ZZ amongst many other cars. Supplied with terminals and seals.

Lotus Lambda Sensor Connector for Elise and Exige modelsSupplied with terminals and seals 

Ignition Coil Connector for Nissan RB Engines Supplied with terminals and seals 

3 Way connector for Lotus Evora Air ConSupplied with terminals and seals

Toyota 2 Pin Vacuum Switching Valve (VSV) Connector Plug for 1JZ 2JZ 1UZ Engines

Engine Coolant Temperature Connector for Lotus Evora/Exige 2GRConnector supplied with terminals and seals

3 Way Toyota Idle Connector used on 1ZZ/2ZZ, Toyota 20V 4AGE, Toyota 3SGE, Toyota 3SGTE Connector is supplied with terminals and seals.

ECU Header for the VAG AGU engine. A 1.8T I4 20v engine found in the VW MK4 Polo, MK4 Golf, Bora/Jetta, Passat B5, Beetle, Seat Ibiza, Cordoba, Leo...

ECU Header for Subaru WRX model years 98-99

ECU Header for the Honda K20 Engine fully populated Ecu header.

For use with both PMU16 and PMU16DL PMU Connector supplied with terminals.  Please note these terminals are the same as EMU Black but EMU terminals...

The VGS-T series of miniature load cells are fitted into the gearbox control rod and designed for use in clutch-less gearshift applications. During...

Additional keypad inserts for 4/6/8/12/15 button keypads Ecumaster offer. Please use the link to look at the inserts we offer.  Price is per inser...

Adaptor for Subaru MY96-MY98 Looms to connect to the ECUMaster EMU Black or Classic Please specify the ecu are you intending to  use it (classic or...

  Adaptor for BMW M50 engine to connect OEM Loom to the EMU Classic/Black. Please specify if you require VANOS or NON VANOS when purchasing. and wh...

Plug & Play kit for connecting the 2.7 Audi RS4 / B5 engine harness with an Ecumaster EMU Black.