Best Sellers

ENCLOSUREEMU BLACK bespoke enclosure is made from CNC machined aluminium. The enclosure design guarantee high immunity to mechanical damage, water ...

Raychem 55 wiring, PRICE IS PER 10 METERS -  please select x2, x3, for multiple purchasesVarious diameter's available from AWG24 to AWG14.AWG24 use...

Heat-Shrinkable, Flexible, Chemical and Abrasion Resistant TubingApplications Specially formulated for optimum high-temperature fluid resistance, a...

The ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practi...

The ECUMASTER USB to CAN is a USB interface that allows the user to connect to the CANbus network. It supports CAN 2.0A and CAN 2.0B standards. It...

  This cost-effective pressure sensor is ideal for measuring fuel and oil pressure. It operates on a 5v power supply and has a signal range of 0-10...

Deutsch DTM connector represent excellent value for money.Easy to work on and highly reliable construction makes them first choice in semi-pro mot...

Roundit® 2000 is a wrap-around sleeving manufactured from modified monofilament and textured polyester yarn, designed for mechanical protection and...

  Digital ECU Tuner 3 is the most popular device as a "piggy back" unit on the market. Due to its many features and cost friendly price, this produ...

Push button switches for all your automotive needs are available in a wide range of colours and can be flush or raised from their housing. Momentar...

ECUMASTER EMU Classic is an advanced engine management system controlling operation of multi spark ignition engines. It controls all aspects of the...

This sensor is designed to measure the proportion of oxygen in exhaust gases of automotive engines (gasoline or Diesel). The wideband lambda sensor...

2.5 meters long set of wires with crimped terminals for use with EMU Black engine management system.Shielded Wire available here 2 Core 3 Core 

State of the art product from ECUMASTER top of the modern power distribution technology.Intelligent power distribution simplify your wiring and pro...

The ECUMaster GPS to CAN Module V2 provides high-accuracy position tracking with 25 Hz update rate. It is designed to work  with four navigation sy...

Connector used for LSU.4.9 oxygen sensorSupplied with seals and terminals

  Resintech RT125 is the definitive adhesive for robust cable harness assemblies, boasting superior flexibility and a remarkable capacity for chemi...

Genuine Bosch pressure and temperature sensor PST-F 1 Robust design and stainless steel diaphragm making it usable for fuel and oil. Link for Data...

DEUTSCH DT Series of environmentally-sealed connectors are designed specifically for cable to cable applications on the engine or transmission, und...

Connector kit used with the Ecumaster EMU Black.Supplied with a set of terminals.

  The EDL1 data logger can record all log channels at 25Hz on an SDHC card (4GB or larger required), the same as on a PC. Additionally, it is capab...

ApplicationsDesigned to encapsulate components, splices and terminations where moisture resistance and mechanical protection are required. Encapsul...

Connector for the Bosch Motorsport range of electronic throttles. Supplied with terminals and seals

2.5 meters long set of wires with crimped terminals for use with EMU Classic engine management system.Shielded Wire available here 2 Core 3 Core

Our new product designed to provide a sealed solution for bulkhead wiring solutions.Requires a 60mm panel cut-out - large enough to feed complete e...

ATUM has an internal adhesive coating that, when heated, melts and flows to form a positive environmental barrier to prevent moisture penetration. ...

Thermocouple to CAN ModuleMeasuring exhaust gas temperature for each cylinder is a very cost effective way to monitor and check air distribution in...

Oil/ coolant temperature sensor - low cost.1/8 thread and fly-leads with Superseal connector.Supplied with 330R pull-up resistor - internal pullups...

Pigtail wiring loom for the Ecumaster DET3

One of the most common connectors used in older fuel injection systems as well as a number of Bosch sensorsSupplied with terminals and seals 

Cradles for both EMU Classic and Black as well as for PMUs. Supplied with AV mounts. Photo is of EMU Classic Mount

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

Push button switches for all your automotive needs, available in a wide range of colours and as either flush or raised from their housing depending...

A CAN switch board is a tiny device to allow easy transfer of up to 8 switch states and 8 analog signals over the CAN bus. In addition to thi...

This sensor is designed to measure the proportion of oxygen in exhaust gases of automotive gasoline engines. The wideband lambda sensor LSU 4.2 is...

This sensor is designed to measure air temperature e.g. in the air box or ambient temperature. The signal may be used as a control value for engine...

Connector kit used for LSU 4.2 lambda sensorSupplied with terminals and seals

Professional EGT probe. This sensor is designed to measure exhaust gas temperatures up to 1,300°C. Thermocouples are temperature sensors, which gen...

Connector used on the PST-F 1 Bosch combined pressure and temperature sensor.  Supplied with pins and terminals 

Ecumaster Bluetooth module designed for communication with Ecumaster EMU Black via Can Bus. Enabling data to be displayed on android devices ...

 3 Way Connector used on some Bosch MAP Sensors Supplied with terminals and seals

  Additional keypad inserts for 4/6/8/12/15 button keypads Ecumaster offer. Please use the link to look at the inserts we offer.  Price is per inse...

44 wire has a dual wall construction that combines the outstanding physical and electrical characteristics of radiation cross-linked polyalkene wit...

Lambda link loom is used with a wide range of our custom plug and play adaptors. Please select the lambda type you are intending to use.

2 Way Bosch Knock Sensor Connector Supplied with terminals and seals 

This is one of the finest boost control solenoids on the market, originally designed for industrial pneumatic machinery and just as sturdy.These va...

Intake air temperature sensor IAT, ideally suited for use with ECUMASTER EMU. The sensor has an M12x1.5 thread.In the configuration of ECUMASTER EM...

Ecumaster Lambda to CAN controller is a compact device used to control a Bosch LSU 4.9 wideband oxygen sensor and transmit the lambda reading via ...