New in

Lotus Lambda Sensor Connector for Elise and Exige modelsSupplied with terminals and seals 

Ignition Coil Connector for Nissan RB Engines Supplied with terminals and seals 

3 Way connector for Lotus Evora Air ConSupplied with terminals and seals

Toyota 2 Pin Vacuum Switching Valve (VSV) Connector Plug for 1JZ 2JZ 1UZ Engines

Engine Coolant Temperature Connector for Lotus Evora/Exige 2GRConnector supplied with terminals and seals

3 Way Toyota Idle Connector used on 1ZZ/2ZZ, Toyota 20V 4AGE, Toyota 3SGE, Toyota 3SGTE Connector is supplied with terminals and seals.

ECU Header for the VAG AGU engine. A 1.8T I4 20v engine found in the VW MK4 Polo, MK4 Golf, Bora/Jetta, Passat B5, Beetle, Seat Ibiza, Cordoba, Leo...

ECU Header for Subaru WRX model years 98-99

ECU Header for the Honda K20 Engine fully populated Ecu header.

For use with both PMU16, PMU16DL and PMU24DL PMU Connector supplied with terminals.  Please note these terminals are the same as EMU Black but EMU ...

  Additional keypad inserts for 4/6/8/12/15 button keypads Ecumaster offer. Please use the link to look at the inserts we offer.  Price is per inse...

Adaptor for Subaru MY96-MY98 Looms to connect to the ECUMaster EMU Black or Classic Please specify the ecu are you intending to  use it (classic or...

  Adaptor for BMW M50 engine to connect OEM Loom to the EMU Classic/Black. Please specify if you require VANOS or NON VANOS when purchasing. and wh...

Plug & Play kit for connecting the 2.7 Audi RS4 / B5 engine harness with an Ecumaster EMU Black.

Adaptor for Fiat 500 Abarth.    

Protect your expensive electronics Fitted to all chassis looms we produce, the high voltage spike suppressor is now available as a stand-alone par...

  The Series of Non-Contact Rotary Position Sensors are designed to withstand the harsh environments of motorsport and automotive testing applicati...

The DBW module is required to allow EMU to control the electronic throttle and it is connected to the an AUX or an INJ output.  up to 7A H-Bridge ...

The ECUMaster GPS to CAN Module V2 provides high-accuracy position tracking with 25 Hz update rate. It is designed to work  with four navigation sy...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

Roundit® 2000 is a wrap-around sleeving manufactured from modified monofilament and textured polyester yarn, designed for mechanical protection and...

Heat-Shrinkable, Flexible, Chemical and Abrasion Resistant TubingApplications Specially formulated for optimum high-temperature fluid resistance, a...

  Resintech RT125 is the definitive adhesive for robust cable harness assemblies, boasting superior flexibility and a remarkable capacity for chemi...

Raychem 55 wiring, PRICE IS PER 10 METERS -  please select x2, x3, for multiple purchasesVarious diameter's available from AWG24 to AWG14.AWG24 use...

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

The ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practi...

AiM MXS 1.2 TFT Digital Display & Dash Logger The MXS 1.2 TFT is a dash logger designed to acquire and display data coming from your ECU. AiM M...

GPS Lap Timer & Data Logger  AiM Solo 2 DL is the most precise and simple way to get lap times, with ECU data and overlay it all with your Sma...

  Our product is dedicated for all Lotus S2 enthusiasts, this system is a great upgrade for your car because it gives you full control over yo...

ECU header used with Toyota Starlet, Glanza 1.3 turbo

BMW, Porsche DME ECU Header

ECU used at various Nissan vehicles including Skyline RB25 and RB26

Can bus keypad easily integrated with our PMU-16 and Ecumaster EMU Black. Very rugged and fully waterproof.8 available colours which are used as a ...

Suits the AAC (main idle speed control solenoid) on R33 RB25DET engines.  Also suits S14 and S15 SR20DET’s.Supplied with terminals and seals

Nissan CAS connectors used in multiple engines.Supplied with terminals and seals

Thanks to solid-state technology - provide ultra-reliable switching critical components. Often used as upgrade supplied by us wiring looms where t...

Our new product designed to provide a sealed solution for bulkhead wiring solutions.Requires a 60mm panel cut-out - large enough to feed complete e...

2 way connector for Denso pencil coils also used for Ford Coyote.

4 Way connector. Used for Mitsubishi TPS and Nissan 300 CAS. Supplied with terminals and seals

The connector used with Denso starter motors 1JZ, 2JZ, 2ZZ Supplied with terminal and seal.  

Flex Fuel Sensor Kits are designed for use with aftermarket ECUs capable of reading an ethanol content sensor. The use of a Flex Fuel Sensor with t...

The ECUMASTER USB to CAN is a USB interface that allows the user to connect to the CANbus network. It supports CAN 2.0A and CAN 2.0B standards. It...

State of the art product from ECUMASTER top of the modern power distribution technology.Intelligent power distribution simplify your wiring and pro...

Connector suitable for early 1JZ engines and 1UZ engines 

Pigtail wiring loom for the Ecumaster DET3

Connector used on Mazda MX5 TPS

Toyota distributor connector also used for throttle pedal and TPS.Supplied with terminals and seals.

  This compact device allows for the connection of up to 3 switches to a single analogue input on Ecumaster products. Utilizing highly precise resi...